The Rube Goldberg Competition of 2009

The Incredible Edible Rolamite!

2009-02-21T20:33:00.001-08:00

Figure 1: Basic Rolamite Designs

(Just click to enlarge!)

When the lever, wheel, pulley, or wedge just won't do, the rolamite will get you through! Using the many marvelous properties of thin metal bands, the rolamite is a simple mechanical device with almost zero internal friction. The basic idea is that two cylinders can be held in place between two planes with a flexible metal band and roll back and forth freely. This basic design (kind of like the rollers that let drawers slide in and out, only less complicated) can be easily modified by bending or reshaping the metal band to create springs, dampening forces, "notches" where the rollers will want to stick... or pretty much anything else you can imagine!

Figure 2: A million uses! Personally I like the thermometer design using a temperature-sensitive metal the best.

(Just click to enlarge!)

Ball bearings can be substituted in most cases, but making perfectly spherical tiny metal balls is actually a pretty hard trick so most ball bearings areneither expensive or have some friction. Plus they always need to be kept clean, lubricated, and are hard to repair.

Of course many people have never heard of the rolamite. The people who discovered it in the 1960s were very enthusiastic about it's potential (see the link below for some rave magazine reviews and predictions!), but the rolamite can be a little hard to get your mind around, and, well, most people haven't heard of it, so they don't know how much they need it! But it's a great tool to think about, and the principle has been used in recent years to build super efficient devices... and we all know how important efficiency and energy conservation is!

Over the years engineers have settled a few great ideas that get used over and over: nuts and bolts, rubber o-rings, ball bearings, cheese-in-a-can. Sometimes it feels like the basic problems are all solved and we just have to apply the standard methods. But there are always special cases: for instance in extreme vacuums or lab clean rooms you can't always use screws or nuts because they can't be undone without oil in the threads (oil evaporates in a vacuum and can cause contamination. You can't use glue, tape, plastic, rubber, ball bearings, or cheese either!). So even wise old experienced engineers have to sit down and rethink the simplest machines and devices we usually take for granted.

Anyways, as you're thinking about your wild machines, keep in mind that even the simplest little ideas can be unique and world-shattering. And if you read this far go reward yourself with some cheese from a can, or at least a tasty sandwich and a glass of milk!

For more about the rolamite, check out these links!

http://www.rexresearch.com/wilkes/1wilkes.htm
http://en.wikipedia.org/wiki/Rolamite

Over and out,

Bryan Newbold
Physics '09
MIT mentor

Split Hairs and Chairs (oh, tables too!)

2009-02-16T07:32:00.000-08:00

ADD: (By the way, there are 2 tables and 7 chairs).

Hi teams,

Chair and table dimensions unknown?!

Since the chairs and tables are replaced on a need basis and are so kindly loaned for our use from the Fay School, they are not all standardized. This means we have no information or guarantees on what they might look like. If you picture a plastic or metal fold out chair in your head or just a regular 6 foot-ish by 3 foot-ish table, that is probably very close to what you will be working with on competition day.

Even though the teams from last year have a sneak peak at table dimensions since they worked with them, there is a likely chance that they will not be receive the same kind of table or set of chairs. This puts everyone on even playing ground because this uncertainty makes it hard to base your designs on the height or width of these components.

If you are able to integrate these two objects into your machine on the day of the competition with some on-the-spot improvising, good! Being able to substitute one material for another or one mechanism for another is a sign of adaptability, which is a great thing for any engineer to have. We have full faith in your imaginative capacity! So long as you have an open mind that's always checking your possibilities, your machine will be able to adjust and calibrate until it's just right.

Hope this helps somewhat!

Happy Valentine's Day,
the MIT mentor team

How to do a Mobile Toaster:

2009-02-06T08:03:00.001-08:00

We have already received a significant volume of e-mails requesting MobileToaster visits. We're so psyched that you're all interested! In order to ensure that we visit as many teams as possible, schools that apply in groups will be strongly favored over those who apply individually. We definitely encourage you to coordinate with other schools in your area to set up several dates that will work for you. If you are located nearby many other competing schools, you are welcome to appear on multiple applications. However, you may only submit one application as a host school. Once you have established a host school, please have them send us an e-mail including the following information:

1. Host Scool's coach's name

2. Host School's name

3. The best way of contacting the Host School's coach (phone number or e-mail address)

4. A back-up contact if we cannot contact the Host School's coach

5. The names of the schools (and coaches) that are going to participate in your MobileToaster date.

6. Dates and Times that work best for the participating groups

7. Expected number of team members (and alternatives) to be present. Please note: the workshop is only open to RGC participants.

Finally, our choices will also be based on whether the teams participating are new to the competition or not. Since we have a limited number of additional supplies, mentors, and time, we are trying to give as many schools as possible an opportunity to participate in the workshop. Unfortunately, we will not be able to visit everyone. Please have your host school contact us AS SOON AS POSSIBLE. Priority will be given to schools that apply before February 25th to allow us ample time to plan for our trip to your school. The more flexible you are with dates, the easier it will be for us to visit more schools.

Wow, what a mouthful!

the MIT mentor team

boooo-yah!

Mobile Toaster Run Down!

2009-01-24T10:29:00.000-08:00

Hello!

So we briefly mentioned the MobileToaster during Teacher Training Day (TTD from here on out), and I wanted to elaborate more on this.

The MobileToaster is an idea that the mentors conceived because they wanted to find a way to get more involved with their teams before the day of the competition. We have a car, some engineering students, tool kits, and a bunch of extra supplies (we order 30 for every 24) that we want to bring to your school! We would like there to be a host school who would be able to offer a large space for all of us to build (all of us being 3+ schools from the area), to discuss our ideas, and to open up communication between teams. While we're at the school, the MIT mentors will pair up with different teams and give them pointers on building, brainstorming, and thinking like an engineer. If you have specific suggestions about what else might be helpful, shoot us an e-mail.

Since we are fairly busy students running around MIT finishing psets, attending meetings, and staying sane, we would like to set dates as soon as possible. This part's up to you! We only have a finite amount of supplies and would like to give first priority to new schools. However, we will be scheduling on a rolling basis. Basically, the earlier you get in contact, the better.

Please e-mail us (rgc09-exec [at] mit [dot] edu) or comment on the blog if you would like to host or even just participate.

Kaboom! Pow! Whack!
the MIT mentors

Experimenting at Teacher Training Day!

2009-01-17T10:54:00.001-08:00

Hey guys,

Thank you for being so inquisitive at teacher training day and asking so many questions. We were really excited about the dialogue that occurred during experiments as well as during our presentations. We changed the experiment format from last year and would like to hear what you have to say.

If you have comments, questions or suggestions please let us know about them! We want to be useful and accommodate you in teaching your kids more about engineering. If there are ways we can do it better, we'd love to hear about it.

Thanks again and see y'all later:

The MIT mentors

Building Up Excitement

2008-12-31T15:34:00.000-08:00

Greetings!

Welcome to the Rube Goldberg Competition's blog for 2009! We're getting excited as the supplies are beginning to arrive and our mentor sorting party date approaches! This blog is an additional guide for the competition. We will be blogging about logistics, answering FAQs throughout the course of the next four months, posting pictures, and uploading URLs to videos. We would love to hear from the competitors and the coaches, all communicating on one common ground.

Of course, if we have an important announcement to make, we'll be sure to contact everyone rather than just posting it on the blog. However, we want to put up supplementary videos a la Bill Nye style about different mechanisms such as levers, pulleys, etc for inspiration. Pictures will mostly be uploaded after the competition date so check back even after the whole event is finished for some extra goodies.

Simply Supplies

Ordering supplies was much harder than we thought it would be. All the nitty gritty details of the competition came to a head, and we had to make decisions. Luckily we had several brainstorming sessions beforehand, and now, we're fairly pleased with the variety. There are definitely some changes from last year! But it seems as though we simply cannot get away from the staples of building materials: PVC, wood, and duct tape. If you were in our shoes, what would you like to see put in the kit in 2010? Do you have any suggestions on different "staples?" What about the more exciting supplies like the chomping teeth and paratroopers from last year: do you have suggestions about some additional things we should include?

Feedback

Your responses will be very important for shaping the next competition. Yes, we know you might be thinking, "but it hasn't even happened yet!" but we want to provide a constant feedback loop. Instead of saving (and potentially forgetting!) all the criticisms and praises for the competition until the end, we'd like to keep an ongoing dialogue so that you can feel free to suggest, comment, and question away all the time! So pretty please let us know what's on your mind.

Would you like to see the blog used for another purpose? Again, just let us know!

Thanks for reading, everyone. We'll see you around real soon...

Brooke J.